Ota yhteyttä heti, jos kohtaat ongelmia!

Lähetä meille sähköpostia: [email protected]

Soita meille: + 86-511 88804588

kaikki kategoriat

rg 58

As data are shared with you until October 2023, knowledge of RG 58 coaxial is somewhat challenging yet crucial for you to understand if you are to arrange your communication or have worked with them. RG 58 is a unique cable that houses a solid copper wire within it. It's this wire that the cable carries signals through. RG 58 has another plastic material, called polyethylene, that acts as an outer protective layer. This cable is widely used in various applications such as radio and television broadcasting, computer networking connecting different devices, as well as telephone lines.

RG 58 coaxial cable is very thin and flexible, making it easier to use in tight spaces. This mesh is incredibly handy when working in tight spaces, like behind a computer or inside a wall. RG 58 has low loss, which means it performs great for low-power applications. Low power uses are functions that do not require significant electricity, like communication between devices. It’s rated for 500 volts of electricity, which should be enough for most low-power jobs you encounter.

Why RG 58 is Ideal for Low-Power Applications

RG 58 and RG 59 are the two most used types of coaxial cable. While they may appear similar at first glance, they are in fact quite different with some notable key distinction. Inside RG 58 there is a solid copper wire and then it is also insulated with a plastic covering. RG 59 is made up of thousands of very small copper wires, referred to as stranded conductors, and a foam plastic forgiving. As a result, RG 59 is thicker than RG 58, which can make it more difficult to use in tight areas. RG 58 also make a better choice than RG 59, as it has a lower loss, which obviously provides better performance. RG 58 is a better option for low-power applications to ensure signals transmission is clear and efficient.

RG 58 cable installation is not that complicated, and can be done in a few easy steps. So the outer cover of the cable has to cut off carefully. This will reveal the inner wire and the plastic insulation around it. Do this carefully, so you don't break the wire inside. You also must now attach a connector to the end of the cable. Special tool: Using a crimping tool. It is used to ensure the connector fits securely with the cable. Lastly, you will plug in the cable that goes into the thing(or equipment) you want to use. Keep the connection tight for the signals to pass through without interference.

Miksi valita RFVOTON rg 58?

Aiheeseen liittyvät tuoteluokat

Etkö löydä etsimääsi?
Ota yhteyttä konsulttiimme saadaksesi lisää saatavilla olevia tuotteita.

Pyydä tarjous nyt